Products
Available at Amazon
Function Generator
Function Generator
-
WF19730.01 µHz to 30 MHz, 1-ch, Sequence function
-
WF19740.01 µHz to 30 MHz, 2-ch, Sequence function
-
WF19470.01 μHz to 30 MHz, 1-ch, Amplitude resolution:16 bit, Low noise and low distortion
-
WF19480.01 µHz to 200 MHz, 1-ch, Max. output voltage: 20 Vp-p (110 MHz or less), Amplitude resolution:16 bit, Various functions
-
WF19670.01 µHz to 200 MHz, 1-ch, Max. output voltage: 20 Vp-p (110 MHz or less), Amplitude resolution:16 bit, Various functions
-
WF19680.01 µHz to 200 MHz, 1-ch, Max. output voltage: 20 Vp-p (110 MHz or less), Amplitude resolution:16 bit, Various functions
-
DF1906Basic model, 0.1mHz to 2MHz, Sine, triangle, square, arbitrary (ARB), DC, Arbitrary waveform editor (standard equipped), Oscillation modes: continuous, trigger, gate and burst
LCR Meter
LCR Meter
-
ZM2371Basic accuracy 0.08%, 1 mHz to 100 kHz, Measurement speed: max. 2ms, Interfaces: USB, RS-232
-
ZM2372Basic accuracy 0.08%, 1 mHz to 100 kHz, Measurement speed: max. 2ms, Contact check function, Interfaces: USB, RS-232, GPIB, handler
-
ZM2376Basic accuracy 0.08%, 1 mHz to 5.5 MHz, Measurement speed: max. 2ms, Contact check and low capacitance check function, Interfaces: USB, RS-232, GPIB, LAN (optional), handler
DC Bias Adapter
-
ZM2328DC bias voltage adapter for ZM2371 and ZM2372, DC bias voltage: ±40 V
-
ZM2329DC bias voltage adapter for ZM2376, DC bias voltage: ±40 V
Test Fixture - Test Fixture
-
ZM23634-terminal, Measurement frequency: ≤ 10 MHz
Test Fixture - Chip Component Test Leads
-
ZM2366Measurement frequency: ≤ 10 MHz, Tip spacing: 0.5 to 8 mm (typ.)
-
2326AMeasurement frequency: ≤ 1.2 MHz, Tip spacing: 0 to 8 mm (typ.)
Test Fixture - Three-terminal Alligator-clip Test Leads
-
ZM23913-terminal, Measurement frequency: ≤ 20 kHz
Test Fixture - Kelvin Clip Test Leads
-
ZM2392Measurement frequency: ≤ 20 kHz
-
2325AL4-terminal, Measurement frequency: ≤ 100 kHz
-
2325AM4-terminal, Measurement frequency: ≤ 100 kHz, Smaller clip than L type
Test Fixture - Chip Test Fixture
-
ZM2393Measurement frequency: ≤ 1.2 MHz, Supported component size: 0603 to 2220
-
ZM2394Measurement frequency: ≤ 2 MHz, Supported component size: 0201 (0.3 mm thick) to 14 mm (square)
-
ZM2394HMeasurement frequency: ≤ 30 MHz, Supported component size: 0201 (0.3 mm thick) to 14 mm (square)
Test Fixture - Four-terminal Alligator-clip Test Leads
-
23244-terminal, Measurement frequency: ≤ 100 kHz
Preamplifier
Low Noise Amplifier
-
SA-200F3Low Noise Amplifier, DC to 800kHz, Input impedance: 1k / 10k / 100kΩ ±5%(DC)
-
SA-220F5Low Noise FET Amplifier, 1kHz to 80MHz, Input impedance: 1MΩ ±5%(5kHz)
-
SA-230F5Low Noise Amplifier, 1kHz to 100MHz, Input impedance: 50Ω ±5%(100kHz
-
SA-240F5Low Noise FET Amplifier, DC to 20MHz, Input impedance 1 MΩ / 100 MΩ / open // 60 pF typ.
-
SA-250F6Low Noise Amplifier, 100Hz to 250MHz, Input impedance 50Ω
-
SA-251F6Low Noise Amplifier, 1kHz to 500MHz, Input impedance 50Ω
-
SA-410F3Low Noise Differential FET Amplifier, DC to 1MHz, Input impedance: 1kΩ/ 10kΩ/ 100kΩ
-
SA-420F5Low Noise Differential FET Amplifier, 1kHz to 70MHz, Input impedance: 1MΩ ±5%(1kHz)
-
SA-421F5Low Noise Differential FET Amplifier, 30kHz to 30MHz, Input impedance: 1MΩ ±5%(1kHz)
-
SA-430F5Low Noise Differential Amplifier, 1kHz to 100MHz, Input impedance: 50Ω ±5%(100kHz)
-
SA-440F5Low Noise Differential FET Amplifier, DC to 20MHz, Input impedance 1 MΩ / 100 MΩ / open // 60 pF typ.
Current Amplifier (current to voltage converter) - Wideband Current Amplifier
-
SA-604F2Gain: 10 M (V/A), DC to 500 kHz, Noise: 45 fA/√Hz (typ.), Shielded case
-
SA-605F2Gain: 100 M (V/A), DC to 250 kHz, Noise: 15 fA/√Hz (typ.), Shielded case
-
SA-606F2Gain: 1 G (V/A), DC to 100 kHz, Noise: 6 fA/√Hz (typ.), Shielded case
-
SA-607F2Gain: 10 G (V/A), DC to 20 kHz, Noise: 2.5 fA/√Hz (typ.), Shielded case
-
SA-608F2Gain: 100 G (V/A), DC to 2 kHz, Noise: 0.6 fA/√Hz (typ.), Shielded case
DC Power Supply - Low Noise DC Power Supply
-
LP5393±12 V to ±15 V, 0.1 A max. Output noise: 10 μVrms or lower (typ.),
Output voltage stability: ±20 ppm/°C (typ.) -
LP53940 to ±15 V, 0.1 A max. Output noise: 10 μVrms or lower (typ.),
Output voltage stability: ±10 ppm/°C (typ.), 10-turn potentiometer
DC Power Supply - BNC Adapter
-
PA-001-2590Converts output to BNC for LP5393/LP5394
DC Power Supply - Binding Post Adapter
-
PA-001-2591Converts output to binding post for LP5393/LP5394
DC Power Supply - Output Cable A
-
PA-001-2372Output cable for SA-600 series (cable length: 2 m)
AC Power Source
AC Power Source - Programmable AC/DC Power Source
-
EC1000SA1 kVA / 1 kW, Max. output voltage: 310 V, Max peak current: 4 times*
*At the rated output voltage. Multifunction (Measurement, sequence, current limiter and protection etc.)
Function Modules
Wideband Current Amplifier
-
CA-554F2Gain: 10 M (V/A), DC to 500 kHz, Noise: 45 fA/√Hz (typ.), PCB implementation, Dual-in-line package
-
CA-555F2Gain: 100 M (V/A), DC to 250 kHz, Noise: 15 fA/√Hz (typ.), PCB implementation, Dual-in-line package
-
CA-556F2Gain: 1 G (V/A), DC to 100 kHz, Noise: 6 fA/√Hz (typ.), PCB implementation, Dual-in-line package
-
CA-557F2Gain: 10 G (V/A), DC to 20 kHz, Noise: 2.5 fA/√Hz (typ.), PCB implementation, Dual-in-line package
-
CA-653F2Gain: 1 M (V/A), DC to 1 MHz, Noise: 150 fA/√Hz (typ.), PCB implementation, Single-in-line package
-
CA-654F2Gain: 10 M (V/A), DC to 500 kHz, Noise: 45 fA/√Hz (typ.), PCB implementation,
Single-in-line package -
CA-655F2Gain: 100 M (V/A), DC to 250 kHz, Noise: 15 fA/√Hz (typ.), PCB implementation, Single-in-line package
-
CA-656F2Gain: 1 G (V/A), DC to 100 kHz, Noise: 6 fA/√Hz (typ.), PCB implementation, Single-in-line package
-
CA-657F2Gain: 10 G (V/A), DC to 20 kHz, Noise: 2.5 fA/√Hz (typ.), PCB implementation, Single-in-line package
Trans Impedance Amplifier
-
IV-202F4Gain: 1 x 105 V/A, DC to 10 MHz, DC coupling unbalanced, single-ended, 6-surface-shielded package
-
V-204F3Gain: 4 x 106 V/A, DC to 1 MHz, DC coupling unbalanced, single-ended, 6-surface-shielded package
Trans Condactance Amplifier
-
VI-206F1Transconductance: 100 μA/V, Load resistance range: 0 Ω to 100 kΩ, Frequency response: DC to 7 kHz, Max. output current: ±100 A
-
VI-207F1Transconductance: 1mA/V, Load resistance range: 0 Ω to 10 kΩ, Frequency response: DC to 10 kHz, Max. output current: ±1 mA
-
VI-309F1Transconductance: 5 mA/V(High gain input) 50 μA/V(Low gain input), Load resistance range: 0 Ω to 10 Ω, Frequency response: DC to 10 kHz, Max. output current: ±50 mA
Piezo Driver
-
PD-206-150PGain: 40dB±0.2dB, Frequency response: DC to 200kHz, Equivalent input noise voltage: 0.8n/√Hz (typ.)
-
PD-206-150BGain: 40dB±0.2dB, Frequency response: DC to 200kHz, Equivalent input noise voltage: 1.5n/√Hz (typ.)
Phase Detector
-
CD-552R2Frequency range: 100Hz to 20kHz, Gain (φ=0): 1 to 10Vdc/Vo-p, Reference signal: C-MOS(0/+5V)
-
CD-951V3Phase sifter for CD-552R3 and CD-552R4 Frequency range : 100Hz to 200kHz, Input level : C-MOS (0/+5V)
-
VD-291F2Input impedance: 5kΩ, Input signal: CMOS(0/5V)level, Square wave, Detection frequency range: 100Hz to 20kHz, Gain: x1, x10 and external Setting
-
VD-291F3Input impedance: 5kΩ, Input signal: CMOS(0/5V)level, Square wave, Detection frequency range: 1kHz to 200kHz, Gain: x1, x10 and external Setting
-
VD-291F4Input impedance: 1.25kΩ, Input signal: CMOS(0/5V)level, Square wave, Detection frequency range: 10kHz to 2MHz, Gain: x1, x10 and external Setting
Resistor Tunable Filter
-
SR-1BP11-pole pair BPF, 6 dB/oct BW, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-1BP21-pole pair BPF, 6 dB/oct BW, f0: 400 Hz to 10 kHz, 20-pin single-in-line package
-
SR-2BE12-pole pair BEF, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-2BE22-pole pair BEF, f0: 400 Hz to 10 kHz, 20-pin single-in-line package
-
SR-2BLH12-pole Butterworth LPF/HPF, 12 dB/oct, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-2BLH22-pole Butterworth LPF/HPF, 12 dB/oct, f0: 400 Hz to 20 kHz, 20-pin single-in-line package
-
SR-2BLH32-pole Butterworth LPF/HPF, 12 dB/oct, f0: 5 kHz to 100 kHz, 20-pin single-in-line package
-
SR-2BP12-pole pair BPF, 12 dB/oct BW, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-2BP22-pole pair BPF, 12 dB/oct BW, f0: 400 Hz to 10 kHz, 20-pin single-in-line package
-
SR-4BH14-pole Butterworth HPF, 24 dB/oct, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-4BH24-pole Butterworth HPF, 24 dB/oct, fc: 400 Hz to 5 kHz, 20-pin single-in-line package
-
SR-4BL14-pole Butterworth LPF, 24 dB/oct, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-4BL24-pole Butterworth LPF, 24 dB/oct, fc: 400 Hz to 20 kHz, 20-pin single-in-line package
-
SR-4BL34-pole Butterworth LPF, 24 dB/oct, fc: 5 kHz to 100 kHz, 20-pin single-in-line package
-
SR-4FH14-pole Elliptic HPF, 42 dB/oct equivalent, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-4FH24-pole Elliptic HPF, 42 dB/oct equivalent, fc: 400 Hz to 5 kHz, 20-pin single-in-line package
-
SR-4FL14-pole Elliptic LPF, 42 dB/oct equivalent, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
-
SR-4FL24-pole Elliptic LPF, 42 dB/oct equivalent, fc: 400 Hz to 20 kHz, 20-pin single-in-line package
-
SR-4FL34-pole Elliptic LPF, 42 dB/oct equivalent, fc: 5 kHz to 100 kHz, 20-pin single-in-line package
BCD Resistor
(RD-404D is a logic control resistor designed for SR series resistor tunable filters)-
RD-404D1Logic frequency setting for SR series, Frequency setting range: 10 Hz to 1.6 kHz, 20-pin single-in-line package
-
RD-404D2Logic frequency setting for SR series, Frequency setting range: 100 Hz to 16 kHz, 20-pin single-in-line package